Burlap for LifeCasting

Burlap for LifeCasting

Burlap is used in LifeCasting to reinforce the relatively thin cross section of layup castings like torso. When putting on the second coat of LiquiStone, embed strips of Burlap in the LiquiStone. This lightens the casting without compromising its strength.

Don't use this on the first coat of LiquiStone or it might show through to the surface of the LifeCast.

Available as a courtesy to our customers who may have a hard time finding burlap. We cut our burlap into 6 inch by 10 inch pieces. Available in bags of 6 pieces or 12 pieces.

  • Burlap is used to reinforce and lighten castings made from layup molds like faces, heads and torsos.  This package has 6 pieces, each 6 inches by 10 inches.

    Burlap- 6 pieces

    Burlap is used to reinforce the gypsum casting. It adds strength by the addition of fibers which lessens the weight of the finished piece. After the first coat of LiquiStone has set, dip pieces of burlap in LiquiStone and apply them to the back of the...

    NP94.97
    Add to Cart
  • 12 pieces of coarse burlap cloth. Each piece is 6 inches by 10 inches- perfect for most lifecasting.

    Burlap- 12 pieces

    Burlap is used to reinforce the gypsum casting. It adds strength by the addition of fibers which lessens the weight of the finished piece. After the first coat of LiquiStone has set, dip pieces of burlap in LiquiStone and apply them to the back of the...

    NP143.89
    Add to Cart